EN
1. Adjust the depth of the disc plow: adjust the depth of the disc plow according to the tillage requirements. Usually, the depth of the disc plow can be controlled by adjusting the height of the plow frame. The angle of the disc plow can affect the tillage effect. Usually, the angle of the disc plow should be adjusted according to soil conditions and tillage requirements. The speed of the disc plow should be controlled according to the tillage requirements. Too fast speed may cause soil damage, and too slow speed may reduce tillage efficiency.2. The disc plow is a hydraulic horizontal swing disc plow. The rear end of the plow beam of the plow is connected to the tail wheel through the tail wheel steering mechanism, the upper end of the plow body is connected to the steering mechanism through the crank arm, one end of the hydraulic cylinder is connected to the plow beam through the ear plate, and the other end of the hydraulic cylinder is connected to the frame through the ear plate. It is a new type of tillage implement used with 8~32 horsepower tractors. The Yuntai drive disc plow consists of an intermediate transmission box, a power transmission shaft, a side transmission box, a disc plow shaft assembly, a seat frame, etc. It is a direct-connected structure. It is suitable for water and dry land cultivation and land preparation.
